Stiebel Eltron CK 200-2 Trend, Wall-Mounted Electric Fan Space Heater, 2000/1800W, 240/208V

New

Click Image for Gallery

Stiebel Eltron CK 200-2 Trend heater is a compact, blower-type space heater with a time-proven reliability and sleek design. Unlike with convection or infrared heaters, fan/blower-forced heaters deliver hot air instantly, allowing to quickly heat the space. The CK Trend series features a knob style thermostat on the top and wall-mount design, intended to free up floor space. CK 200-2 Trend model is hardwired and can easily be installed in any place where a 208/240V outlet box is available.

Technical Specifications:

Voltage: 240 or 208V (hardwired)
Output: 2000W at 240V (1800W at 208V)
Amperage: 8.3A at 240V, 8.7A at 208V
Rated output (Btu/hr): 6824 at 240V (6142 at 208V)
Air volume: 70.6 CFM
Recommended circuit breaker size: 15A
Minimum wire size: 14 AWG
User interface: control knob
Timer: no
Room size estimate: 200 sq.ft.
Heating element: ceramic PTC
Thermostat & high limit: bimetal type
Motor: 20w shaded pole
Blower: glass-reinforced polycarbonate, radial type
Temperature range: 41F - 86F
Frost protection setting: 45F
Operating noise: 49.7 dB(a)
Dimensions (Height x Width x Depth): 15-3/4" x 10-7/8" x 5-1/8"
Weight: 5.5 lb

Features:

Compact, low-profile, elegant and simple solution to for primary (small rooms) or supplementary (larger rooms) heat source
Powerful, yet very quiet (50 dB) blower helps to heat the room quicker
Knob/dial type thermostat with adjustable heat settings
Frost protection setting maintains room above freezing temperature
Can be wired to and controlled by an external thermostat
Made in Germany

**Max Loop Length Chart**
Size	Max Loop Length
5/16"	250 ft.
3/8"	250 ft.
1/2"	300 ft.
5/8"	400 ft.
3/4"	500 ft.
1"	750 ft.
Note: Based on 10 degree Delta T

**Minimum Bend Radius for PEX Tubing**
PEX Size	ID	OD	Minimum Bend Radius*
3/8"	0.350"	0.500" (1/2")	3"
1/2"	0.475"	0.625" (5/8")	3.75"
5/8"	0.574"	0.750 (3/4")	4.5"
3/4"	0.671"	0.875" (7/8")	5.25"
1"	0.862"	1.125" (1-1/8")	6.75"
Note: Minimum bend radius equals 6-times the outside diameter